# Your question: Why does my grandfather clock keep stopping?

Contents

Often a pendulum clock will stop when it has been moved, bumped or even a too aggressive push to restart a pendulum. It is not broken, only out of beat. This only takes a few minutes to readjust and all pendulum clock owners should learn how as this will happen eventually.

## How do you fix a grandfather clock that keeps stopping?

1) Examine the dial on the grandfather clock and check to make sure the hands are not touching or hanging on any parts of the dial or second hand. 2) Check the leveling of the grandfather clock. There are 4 adjustable levelers on the bottom corner of most grandfather clocks.

## Why does the pendulum on my clock keep stopping?

The reason a clock pendulum often stops swinging, after being moved, is because the clock case now leans at a slightly different angle then it did at its former location. … A clock is “in beat” when the tick and the tock are evenly spaced.

## What does it mean when a clock keeps stopping?

A clock that is out of beat is likely to stop because the pendulum is not receiving the optimum impulses to keep it swinging. If it’s badly out of beat it will stop within a few minutes. If it’s only slightly out of beat it could run for days but will eventually stop earlier than it should.

## Should the weights on a grandfather clock drop evenly?

Yes, the order is critical for proper function. On 99% of floor clocks (grandfather/grandmother) with three weights, the heavier weight goes on the right-hand chain hook or pulley as you are FACING the clock.

## How do I reset my grandfather clock?

Most grandfather clocks play a melody and chime on the hour. In order to set the time without playing the melody, move the minute hand counterclockwise. Winding the minute hand 1 full rotation counterclockwise will set the clock back by 1 hour. Do not move the hour hand.

## How much does it cost to repair a grandfather clock?

The cost of servicing a grandfather clock can vary between \$100 and \$2,500, depending on what services are necessary. Normal servicing is not too costly while repairing and replacing parts can quickly add up. Major factors that impact the cost include: The type of clock and internal mechanisms.

## Why does my anniversary clock keep stopping?

The spring being bent is the number one cause for most of these clocks not working. … First there is the brass bottom block that the Anniversary Clocks Pendulum balls attach to. Then in the upper middle of the spring there is the fork attachment that whacks the verge back and forth.

## How do you hang weights on a grandfather clock?

If there is no markings to identify the weights, hang the heaviest weight on the right side as it needs more power to run all of the chime hammers. The other two equal or lighter weights should be placed in any order on the left side and center position. This will usually work on most grandfather clocks.

THIS IS INTERESTING:  Does WatchMaker work with Apple Watch?

## What causes a pendulum to slow down and stop swinging?

When the swing is raised and released, it will move freely back and forth due to the force of gravity on it. The swing continues moving back and forth without any extra outside help until friction (between the air and the swing and between the chains and the attachment points) slows it down and eventually stops it.

## What causes the pendulum to stop on a grandfather clock?

Often a pendulum clock will stop when it has been moved, bumped or even a too aggressive push to restart a pendulum. It is not broken, only out of beat. This only takes a few minutes to readjust and all pendulum clock owners should learn how as this will happen eventually.