# Question: Which weight controls the chimes on a grandfather clock?

Contents

Generally, mechanical weight-driven clocks that feature a melody will have three weights, unless otherwise noted of course. The middle weight regulates the time, the left weight (as your looking at the clock) regulates the strike and the right weight (as your looking at the clock) regulates the chimes.

## What are the three weights for on a grandfather clock?

The three weights provide power to the hour strike (left weight), time (center weight), and chime melody (right weight).

## Which side does the heaviest weight go on a grandfather clock?

If there is no markings to identify the weights, hang the heaviest weight on the right side as it needs more power to run all of the chime hammers. The other two equal or lighter weights should be placed in any order on the left side and center position. This will usually work on most grandfather clocks.

THIS IS INTERESTING:  What is the difference between clock in and clock out?

## What does the left weight on a grandfather clock do?

The left weight powers the hour and the number of chimes to coordinate with the hour. The middle weight powers the pendulum, and the right weight powers the melody you hear. At the base of each weight should be an “L,” “C” or “R” to indicate the order of placement.

## Why do some grandfather clocks have two weights?

The left weight provides power for the hour strike, the middle weight provides power for the clock’s pendulum and general timekeeping functions, while the right weight provides power for the quarter-hour chime sequences.

## How do I turn off the chimes on my grandfather clock?

Look for a lever or setting called “Chime Silent” or similar. The setting may be on the clock face and not near other controls. If you’d like to shut down the Westminster or other chimes, select the “Silent” option.

## Should the weights on a grandfather clock drop evenly?

Yes, the order is critical for proper function. On 99% of floor clocks (grandfather/grandmother) with three weights, the heavier weight goes on the right-hand chain hook or pulley as you are FACING the clock.

## How heavy are the weights in a grandfather clock?

Grandfather Clocks weigh anywhere from 100 to 200 pounds and require special attention when moving them from one place to another.

## How do you hang weights on a grandfather clock?

Hang the “L” weight on the hook at the bottom of the chain or cable on the left side of the clock case–the side to the viewer’s left. Hang the “R” weight on the right hook and the “C” weight on the center hook. Hold the three weights in your hand if there are no letters stamped on the bottom.

THIS IS INTERESTING:  Best answer: How do you fix an Apple Watch that freezes?

## Why won’t My grandfather clock stay running?

Your clock needs to have an even “tick”. If the tick sounds comparable to a guy walking with a limp, it won’t run. The pendulum needs to travel an EVEN distance after each tick. If it doesn’t, it will stop.

## How does a grandfather clock chime work?

When properly chiming, the traditional Westminster chimes plays four descending notes on the first quarter-hour, eight notes on the second quarter-hour, twelve notes on the third quarter hour and 16 notes on the hour. After the clock chimes on the hour, it should then strike the number of hours.

## How do you wind a grandfather clock with weights?

Some modern grandfather clocks don’t have winding points on their faces. Instead, each weight has a chain dangling behind it. To wind this kind of clock, simply pull down on the chains until the weights reach the underside of the wooden board at the top of their trajectory.

## How level does a grandfather clock have to be?

Once located, the grandfather clock needs to be levelled from front-to-back and side-to-side in order for the clock to operate properly. Some grandfather clock cases have adjustable feet in each corner, while others do not.

## How do you wind a clock with weights?

To wind, simply pull down on the chain. As you pull the chain down you should see the weight rise. When fully wound, the weight should hit the underneath of the “seat-board” and prevent you from winding anymore. Repeat this process for each of the weight chains.

THIS IS INTERESTING:  Can I pause my Apple Watch update?