How do you pack a mantel clock?

Wrap item in enough bubble wrap (avoid paper!) to create a cushion of 4-5 inches all the way around it. Wrap 2+ inches one way, then turn the bubble wrap 90 degrees and wrap it again, 2+ inches thick in each direction. Tape down the bubble wrap to itself.

How do you transport a mantle clock?

Lift out the pendulum and package it safely. Do not tape or wrap the pendulum in place, or it is likely to get damaged during transport. Secure the hands by placing a sheet of bubble wrap between them and the face of the clock. Use painter’s tape if necessary to hold the bubble wrap in place.

How do you pack a clock with exposed hands?

Protect The Exposed Hand Shaft:

Hold them in place with a rubber band around the clock. Just make sure that the cardboard tubes, or Styrofoam blocks are ¾” or more inches higher (or thicker) than the end of the hand shaft they protect.

How do you pack a clock?

Prepare the Item for Packaging:

  1. Follow above first, then place a sheet of bubble wrap between the clock hands and the dial.
  2. Place enough layers of bubble wrap between the dial/hands and the glass so that when the door is closed, the bubble wrap is VERY LIGHTLY compressed. …
  3. Close and lock the door/glass.
THIS IS INTERESTING:  How do I get my clock widget back?

How do you pack a grandmother clock for moving?

How to move a grandfather clock like a pro

  1. Remove the weights from the clock.
  2. Wrap the weights in a moving blanket to protect them from damage.
  3. Place moving blankets inside the clock to stabilize glass from the inside.
  4. Wrap the outside of the clock to protect it from damage.

How do you transport old clocks?

Safe Shipping of Antique Clocks

  1. it is better not to move a clock until its movement stops;
  2. all sensitive components (e.g., pendulum and weights) should be necessarily removed from the clock and packed separately using bubble wrap;
  3. cables and chains should also be packed separately in the bubbled bag;

How do you pack an antique clock?

Place your clock inside the box and fill it with packing peanuts or other cushioning material. However, keep in mind that a single box is not enough to protect an antique clock in transit. You need to double-box it or, what is much better, order a custom-made wood crate for it.

How do you care for an old mantle clock?

Cleaning an antique clock should be done very carefully with a soft lint-free cloth and a soft-bristle brush. Avoid metal polishes which may seep into the movement or destroy a valuable patina, like the patina on a brass carriage clock.

How do I move my anniversary clock?

To set the correct time, simply use your finger to turn the minute hand until you reach the correct time. Since most anniversary clocks do not chime, you can turn the minute hand in either direction to reach the correct time. Do not turn the hour hand, as this can damage the clock.

THIS IS INTERESTING:  Can an employer not pay you for not clocking in?

How do you move a cuckoo clock?

Easy Steps for Safely Packing and Shipping a Cuckoo Clock

  1. REMOVE DECORATIVE PARTS. Pull the chains to bring the pinecone weights to the bottom of the cuckoo clock. …
  2. CLOSE THE DOOR. …
  3. SECURE THE CHAINS. …
  4. REPLACE THE BELLOW CLIPS. …
  5. SILENCE THE GONG. …
  6. WRAP IN PROTECTION.

How do you pack glass domes?

Instructions

  1. Use a Cell Pack. Purchase cell boxes from specialty packing supply stores, or ask for used bottle boxes at a grocery store or liquor store. …
  2. Prepare the Box. …
  3. Stuff the Globe. …
  4. Place the Glass on Its Side. …
  5. Wrap the Glass. …
  6. Fold the Ends. …
  7. Insert the Glass. …
  8. Top up the Box.

How do I ship a glass dome?

Wrap the Glass in Bubble Wrap

Wrap your glass item in a layer of packing paper or newspaper and secure it in place with a piece of tape. Then wrap the glass in several layers of bubble wrap and tape it in place. Your glass should be covered in three to four layers of bubble wrap when you’re done.