Turn the adjustment nut on the pendulum disk to change the speed of timekeeping. Turn the adjustment nut to the left to slow the clock down. Turn the adjustment nut to the right to speed the clock up. Turn it one complete turn for each half minute you wish to increase or decrease the time keeping.
Why is my Howard Miller grandfather clock not chiming?
Check that the strike on/off lever in not in the “strike off” position or halfway between positions. Check that the movement is not in the “night off” position. Be sure that all the packing material is removed from the movement area.
Why has my wall clock stopped chiming?
If your clock has stopped chiming after 5 years, or has stopped chiming correctly, chances are the problem is a lack of, or improper, maintenance. Most manufacturers of clocks recommend ‘oiling’ a clock every year. … The clock often stops functioning properly due to this lack of lubrication or from the worn parts.
How do you reset the chimes on a Howard Miller grandfather clock?
How to Reset My Chiming Clock
- Place one forefinger gently on the minute hand and push it lightly over to the number 12. Your clock will now naturally emit a series of chimes. …
- Move the hour hand very gently to this number on the clock face. …
- Push the minute hand around the clock until the clock displays the actual time.
How do you fix the chimes on a grandfather clock?
Use your free hand to turn the minute hand of the grandfather clock to the correct chiming time. For example, if the clock had chimed at 12:10, instead of 12:15, the hand must be turned forward five minutes. Turn the hand right-side up, and place it back on the shaft of the grandfather clock.
How do I get the chimes to work on my grandfather clock?
If your grandfather clock doesn’t have a chime on /off selector on the dial, look just below the dial for a rod hanging down which you may push up or pull down to start the chimes.
Why does my clock chime wrong?
The usually happens when an hour hand is moved by mistake when re-setting the time on your grandfather clock. Sometimes if a grandfather clock is allowed to wind down so the weights are on the bottom and the grandfather clock pendulum stops, this can happen.
How do I fix the chime on my mantle clock?
Adjusting the Quarter Chime
On most mantel clocks, you can simple remove the minute hand which is friction fit. You have to apply pressure on the tube and it will loosen. Once removed, re-install the minute hand at the correct time. From there you can rotate the minute hand to reset the time.
Is it OK to turn a clock backwards?
If your timepiece has a mechanical movement, then it is best not to put the clock in reverse. If your timepiece is a quartz movement, you are probably safe to turn it backward. If you have a very old cuckoo clock, it may not even go in reverse without breaking the mechanism.