Question: Is a clock spring covered under warranty?

The warranty only covers the clockspring, and that’s only because it is required for the driver airbag to work.

How much does it cost to replace a clock spring?

For a clock spring, the parts alone will cost $80 to $150; however, if a professional mechanic is going to replace the clock spring for you, the average job will cost anywhere from $200 to as much as $400.

What happens when a clock spring goes bad?

An airbag clock spring is used to connect the steering wheel to other electrical devices such as the airbag safety system, radio volume and station selections, horn and cruise controls. … When this malfunction occurs it will cause the airbag warning light to come on and the system to shut down.

Can I drive my car without a clock spring?

If you try to drive a car with a faulty or broken clock spring, you will experience a lot of difficulty when you try to rotate the steering wheel, and what’s more, if you prolong this, it will cause damage to other parts of your car, too, not to mention putting yourself, as the driver, at risk.”

THIS IS INTERESTING:  How long does an Apple Watch 6 take to charge from dead?

Will bad clock spring deploy airbags?

This is because even the slightest error in the airbag system can cause them to deploy, or in the worst case, not deploy at all in case of an accident. This is why an airbag or srs light is the most common sign of a faulty clock spring, especially if the light occurred when you were turning the steering wheel.

Can I replace a clock spring myself?

Remove Steering Wheel Bolt Cover Clips. Remove SRS Airbag Control Module Bolts. Remove the SRS Airbag Control Module from the Steering Wheel (make sure you disconnect any electrical connectors) … Once the steering wheel has been removed, you can remove the clock spring.

Can you repair clock spring?

While it is sometimes possible to repair a damaged clock spring, it is generally better to buy a new one. Clock springs are cheap, and it’s important to have a reliable unit since they may be involved with the correct function of the driver’s airbag, the horn, cruise control, and traction and stability control systems.

Do I need to replace clock spring?

The clock spring may need to be replaced if it is damaged during careless service to the steering system, and, in some cases, if the vehicle is in a crash and the driver’s airbag deploys.

What is the purpose of clock spring?

In vehicle steering systems a clock spring or clockspring is a spiral-wound special rotary electrical connector which allows a vehicle’s steering wheel to turn while still making an electrical connection between the steering wheel airbag and/or the vehicle’s horn and other devices and the vehicle’s electrical systems.

THIS IS INTERESTING:  Which Apple Watch can you make calls on?

How do I reset my clock spring?

How to reset a clock spring?

  1. Start the engine and let it idle.
  2. Turn the steering wheel all the way to the right.
  3. Turn the steering wheel all the way to the left.
  4. Repeat this procedure twice with the engine running.
  5. Drive for at least 50 feet, and the steering angle sensor will reset.

Why does my car horn work sometimes?

But an inoperative car horn can also be caused by a bad horn switch in your steering wheel, a broken “clock spring” under the steering wheel, a bum horn relay, a broken wire, or a corroded ground. … Clean the horn’s ground connection and try powering the horn again. If the horn still clicks, you’ll have to replace it.